Preventing black spores around the bathtubDecember 16, 2009
Q: We have had to re-caulk our tub several times, only to find when we get in the tub, the caulking lets go in some areas and we get mold growing around the edges. Could you please tell me what we can use to remove the old caulking and what type of caulking to use that will not turn black or peel off around the edges again?
A: To prevent the black spores from forming around the bathtub, you must control the bathroom moisture and use proper ventilation. The black spores that form in and around a bathtub is caused by a lack of drying in the shower and bath after each usage. A good practice after every shower or bath is to towel the area down and leave the bathroom fan running for at least one hour. Timers or de-humidistats are a great investment for the proper operation of your bathroom fans.
Next, to re caulk the area you must completely remove the existing caulking. Once you have removed the majority of caulking use a silicone sealer remover to clean off any residual. There is a newer Silicone and Adhesive Remover that is available called Re-mov that doesn't use flammable or corrosive chemicals so itís safe to use on fibreglass and vinyl. Rather than dissolving the silicone this silicone remover breaks the bond with substrate so you can pull off the caulking rather than dissolving it unlike the other silicone removers that have been available; making it easier and less messy to work with.. Go to www.removcanada.com for a retailer. Once you have thoroughly cleaned the area, allow it to dry completely before applying the new caulking or you can speed the drying process with a blow dryer.
When you are ready to caulk, fill the tub up to the overflow level and re-seal with a mildew resistant kitchen and bathroom silicone sealant. Leave water in the tub at least twelve hours, this will allow adequate time for the sealant to cure. For a cleaner job, you can use painter's tape along the walls and bathtub edge.
Itís just that easy!
for more certified home service providers
Shell will be on stage at the PG Home Show & Energy Fair April 26 & 27
Date: April 26 2014