The best way to sort out those cracks and stains on your asphalt - The Province, Sunday July 31st
August 2, 2011
Has your asphalt driveway or patio become tired looking with cracks and oil stains from the car or barbeque?
Asphalt has been used for many years for driveways and patios but it does not have the strength or stability of concrete. Asphalt surfaces require preventative maintenance every 3 to 4 years to keep it looking attractive.
Here are some suggestions to make your asphalt look good again
Tree roots that have come up through the asphalt should be removed. This can be done by renting an asphalt cutting machine opening up the asphalt and removing the root. You can replace the cut out section with interlocking paving stones giving some added design and better drainage to your flat surface.
All oil spots should be sealed with oil spot primer and cracks filled with an asphalt crack filler. When all the repairs are completed, thoroughly clean the surface with an all purpose exterior cleaning such as my Home Cleaning Formula, which is available at your local building supply store.
Now for the final touch, apply a coating of coal tar asphalt sealer, such as Jet Seal, with an applicator brush and squeegee. Pour the coating onto the surface and draw the squeegee over the surface filling all the pores in the asphalt leaving a smooth sealed surface. Use the brush to trim around curbs and edges of grass.
Itís Just That Easy!
More to come next week. This article was published in The Province
newspaper, Sunday July 31st